These nozzles have been designed specifically with belt printing in mind. They’re sharper than any standard 3D printer nozzle which creates clean prints, even while printing at an angle.
You will receive four nozzles in this pack with four different diameters – 0.2, 0.4, 0.6, and 0.8mm.
Belt Printer Nozzles for Premium Hotends (Slice Mosquito, E3D V6)
Many hotends use the same thread pattern for the nozzle which makes them easily interchangeable. This common pattern is 6mm in diameter and 7mm in length.
Belt Printer Nozzles for Budget 3D Printers (Creality Ender3, CR10, etc.)
Budget-friendly 3D printers often use one of two very similar looking hotends. The difference comes down to the nozzle. on MK8-style hotends, the thread pattern is M6x1.0, and 5mm in length.
On MK10-style hotends, the thread pattern is M7x1.0, and the PTFE tube presses into the center of the nozzle. This style of hotend will not work with our Belt Printing nozzles. MK10-style hotends can be easily recognized by their wider appearance.
These nozzles are INSANE. The way my test cube came out was just so geometrically superior…. All in all I appreciate your product and I finally have been able to print this carbon material with your belt and some glue stick and your nozzle. (it really is picky on what it sticks on i guess) i haven’t been satisfied with this CR30 yet until now. (hope im not speaking too soon but golly so far so good) – Josh A. – Florida – CR30 user
Those nozzles are exactly what I was looking for for this machine. I could see the side of the stock nozzle dragging on the bed, these have definitely solved that. Thank you Adam. I appreciate it. – Rob K. – Illinois – CR30 user