Formula32 Conveyor Belt for Powerbelt3D Zero


The Formula32 conveyor belt was created after 28 months of trial and error to create an affordable, durable conveyor belt for 3D printers. Please allow 3-5 business days for shipping.

SKU: F32 Category:

The Formula32 conveyor belt is durable, flexible, and designed specifically for the Powerbelt3D Zero. It uses a Polyester (PET) tape top-layer that works very well with a variety of 3D printing materials.

For PLA, we recommend a bed temperature of 65-75C. For PETG and TPU, we recommend a bed temperature of 75-85C.

We recommend applying a thin layer of glue stick to the conveyor belt. When printing PLA, this helps the prints stick to the conveyor belt. When printing PETG, it acts as a release agent to prevent PETG sticking too much to the conveyor belt, and causing the top PET layer to tear. If tearing still occurs, increasing the speed of outer contour that contacts the conveyor belt may help.

The conveyor belt should be installed so that the smoothest, green-tinted side will be printed on.

Dimensions: 220x1040x0.5mm
Dimensions are approximate and may differ slightly between conveyor belts due to being made by hand with love.