These nozzles have been designed specifically with belt printing in mind. They’re sharper than any standard 3D printer nozzle which creates clean prints, even while printing at an angle.
You will receive one hardened steel belt printer nozzle of your preferred diameter and thread length.
Hardened Steel Nozzles for Premium Hotends (Slice Mosquito, E3D V6)
Many hotends use the same thread pattern for the nozzle which makes them easily interchangeable. This common pattern is 6mm in diameter and 7mm in length.
Hardened Steel Nozzles for Budget 3D Printers (Creality Ender3, CR10, etc.)
Budget-friendly 3D printers often use one of two very similar looking hotends. The difference comes down to the nozzle. on MK8-style hotends, the thread pattern is M6x1.0, and 5mm in length.
On MK10-style hotends, the thread pattern is M7x1.0, and the PTFE tube presses into the center of the nozzle. This style of hotend will not work with our Belt Printing nozzles. MK10-style hotends can be easily recognized by their wider appearance.
